Important information about purchasing from the US.
If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.
28 Online retailers selling the NT6
The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.
Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.
The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.
Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.
The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.
The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.
The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter with bipolar output buffer|
|Frequency Range||40Hz - 20kHz|
|Maximum Output Level||6.0mV (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||19dBA|
|Dimensions||189.00mmH x 64.00mmW x 20.00mmD|
|Warranty||1 year with free extension to 10 years following registration here|
I have to say that this is another accomplished offering from the Australian manufacturer... sonically it's hard to find fault with this microphone. The combination of diminuitive design smarts, reliability and sonic integrity will no doubt see this microphone become a popular choice in a wide variety of roles.
This microphone has plenty of top-end airiness, but it doesn't sound at all harsh. What's more, it goes very deep... The NT6 retains its even and neutral response throughout the frequency range.
1" Cardioid Condenser Microphone
Variable Pattern Dual 1" Condenser Valve Microphone
Valve 1" Condenser Microphone
Seamlessly Variable Dual 1" Condenser Microphone
1" Studio Condenser Microphone
Multi-Pattern Dual 1" Condenser Microphone
3/4" Cardoid Condenser Microphone
X/Y Stereo Condenser Microphone
Compact 1/2" Cardioid Condenser Microphone
Multi-Pattern 1/2" Condenser Microphones
Live Condenser Vocal Microphone
Live Performance Dynamic Microphone
Live Performance Dynamic Microphone with Lockable Switch
Live Performance Condenser Microphone
Versatile End-Address Condenser Microphone
End-Address Broadcast Condenser Microphone
Broadcast Quality Dynamic Microphone
Multi-Powered Shotgun Microphone
RF-Bias Shotgun Microphone
RF-bias Long Shotgun Microphone
Omnidirectional Interview Microphone
1" Cardioid Condenser Microphone
Compact 1/2" Condenser Microphone
Active Ribbon Microphone
Directional Condenser Microphone
Directional Condenser Microphone with Inbuilt Battery
Location Recording Kit