Important information about purchasing from the US.
If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.
Online retailers selling the VideoMic NTG
The VideoMic NTG is a broadcast-grade, feature-packed shotgun microphone optimised for on-camera use. It features the same revolutionary acoustic design as the NTG5 broadcast shotgun microphone, which delivers unmatched transparency and a natural, uncoloured sound. Add to this an incredibly flat frequency response, highly directional supercardioid polar pattern, and very low self-noise, and what you have is a compact on-camera microphone that contends with the world’s best shotgun mics.
As well as sounding outstanding, the VideoMic NTG is extremely flexible, with an array of tools and features to help you take on any recording situation. Digital switching gives you access to a high-pass filter, -20dB pad, high frequency boost, and safety channel, plus there is a unique infinitely variable gain control that allows you to precisely tailor the output as you need. Its auto-sensing 3.5mm output detects what device you are connected to (camera or mobile) and switches to accommodate – no more messing around with adaptor cables! There is also a handy new dB peak warning light, so you can always ensure your audio isn’t clipping.
The VideoMic NTG is so much more than just an on-camera mic. As well as pairing perfectly with DSLRs, compact cameras, and smartphones – either on-camera, as a boom mic, or on a pistol grip – it is also a fully-featured USB microphone that can be plugged into a computer, tablet, or smartphone. On top of this, the 3.5mm jack doubles as a headphone output for seamless monitoring of audio while using the USB output.
Pressure gradient electret condenser
20Hz – 20kHz
35Hz – 18kHz ±3 dB
|Signal to noise Ratio|
105dB SPL (A-weighted, as per IEC651)
15dB SPL (A-weighted, as per IEC651)
-26 dB re 1V/Pa (50mV @ 94dB SPL) ± 1dB @ 1kHz
|Input SPL @ 1% THD|
|High Pass Filter Frequency|
3.5mm auto-sensing USB-C
Mac OS 10.12
The auto-power feature was first introduced to the VideoMic range with the VideoMic Pro+. It is a handy function that automatically turns the microphone off when it detects that the camera is switched off, helping conserve battery life, and turns it on when the camera is turned on, so that you never have to worry about missing a take. The auto-power function only works if your camera delivers plug-in power (most do), as this is what tells the microphone if it is on or off, or if you are using the microphone in USB audio mode. The VideoMic NTG also features a power button, so that it can be manually powered on and off. Check out our list of cameras that deliver plug-in power here.
The auto-sensing output is an intelligent feature that seamlessly detects whether your microphone is plugged into a TRS input, like those on most cameras, or a TRRS input, which most smartphones and tablets have, and switches the output to accommodate. This means you don’t have to worry about using TRS to TRRS adaptor cables – the SC10 cable that accompanies the VideoMic NTG will work seamlessly with any device. However, if your device has a Lightning® connector or anything other than a 3.5mm input, you will need to use an adaptor.
The infinitely variable gain control is a knob on the rear of the microphone that allows you to precisely tailor the output level to your recording device. This is an active control that has a greater output range than any other microphone on the market – it can deliver anything from mic level signal all the way to a headphone level output, which is particularly useful when using the 3.5mm jack as a headphone output. Where other microphones simply employ a pad to adjust the output, the VideoMic NTG’s control also actively amplifies the signal at various gain stages, resulting in a cleaner audio with a vastly improved signal-to-noise ratio (it essentially does all the hard work so your camera’s lower-quality internal preamp doesn’t have to, lowering the noise floor of your signal).
2 hours from empty to full.
When connected to a camera or smartphone, we recommend you turn down the gain of your camera to, or close to, its lowest setting, and turn off any automatic gain controls that may be activated. Then, starting from the lowest setting, turn up the infinitely variable gain control on the VideoMic NTG until your meters are showing a good level (usually just starting to touch the yellow, or about halfway) when recording your expected sound source. Where possible, monitor your audio using headphones, to ensure your sound is clean and clear.
There are three physical controls on the VideoMic-NTG:
The VideoMic NTG has extremely low self-noise for a microphone of this type (15dBA). All the RØDE VideoMics have extremely low self-noise; in fact, the VideoMic Pro and VideoMic Pro+ are actually slightly quieter than the VideoMic NTG. It’s worth comparing the VideoMic NTG to other on-camera microphones for reference as to how quiet all RØDE microphones are.
Yes, this is the same for the VideoMic NTG. We’ve designed the output level to be similar to the VideoMic Pro+ when the gain knob is set to 10. This is the best place to start with any device, and adjust the level up or down from there. With any VideoMic, the best results are generally achieved when the camera preamp is being driven as little as possible.
There isn’t a standby mode on the VideoMic NTG, it’s either off and not drawing any power, or it’s completely on. When the microphone is off it will last months without the need to charge.
There is no difference in the sonic characteristics of the safety channel, it is just 20dB lower than the main channel. However, when you boost the safety channel in post-production, you may notice some preamp noise from your camera, which may affect the perceived audio quality. The safety channel should ideally be used to replace the small piece of audio that has clipped, and it’s best to blend the audio in and out quickly to reduce any noticeable quality change.
All RØDE microphones are tested extensively for interference from a wide range of devices. We make sure that the bodies are extremely well shielded and that the electronics aren’t susceptible to interference. Our state of the art RF test facilities allow us to put microphones through a wide range of RF simulations, which ensures our designs are robust and highly resistant to RF interference.
The internal battery is not user-replaceable, however, the VideoMic NTG has a 10-year warranty once it has been registered. If there are any issues with the battery within this time frame, simply contact the RØDE support team and we'll happily help out.
No. The VideoMic NTG's safety channel does not function with devices with a TRRS input as they only support one channel of audio.